#pragma once
#include <Arduino.h>

// ---- TFT (hardware SPI: SCK=D5, MOSI=D7) ----
#define TFT_CS   D8
#define TFT_DC   D3
#define TFT_RST  D4
#define TFT_BLK  D2

// ---- I2C (BMP180 + DS3231 share this bus) ----
#define I2C_SDA  D6
#define I2C_SCL  D1
#define BMP180_ADDR 0x77
#define DS3231_ADDR 0x68

// ---- Scheduler intervals (ms) ----
// NOTE: for quick bench testing you may temporarily shrink these.
static const unsigned long SAMPLE_INTERVAL_MS  = 60UL * 1000UL;         // read sensor / redraw
static const unsigned long HISTORY_INTERVAL_MS = 5UL * 60UL * 1000UL;   // store a history sample
static const unsigned long FLUSH_INTERVAL_MS   = 15UL * 60UL * 1000UL;  // flush history to flash

// ---- History buffer ----
static const int   HISTORY_SIZE        = 288;   // 24 h @ 5 min
static const float TREND_THRESHOLD_HPA = 1.6f;  // >|1.6| hPa / 3 h = rising/falling

// ---- Forecast change log ----
static const int   FORECAST_LOG_SIZE   = 24;    // last N forecast changes

// ---- Defaults (editable via web) ----
static const float DEFAULT_ALTITUDE_M    = 150.0f;
static const int   DEFAULT_TZ_OFFSET_MIN = 7 * 60; // UTC+7
static const float DEFAULT_LAT           = 54.9870f;
static const float DEFAULT_LON           = 82.8730f;

// ---- Network ----
// NTP is done by hard-coded IP in rtc_time.cpp (this LAN's DNS is unreliable).
#define AP_NAME    "WeatherPredictor-Setup"